HI96736 เครื่องวัดความกระด้าง Total Hardness และ pH

฿20,000.00

เครื่องวัดความกระด้าง Total Hardness และ pH รุ่น HI96736 เป็นเครื่องวัด 2 in 1 มีคุณสมบัติขั้นสูงมากมายรวมถึงฟังก์ชั่น CAL Check การสอบเทียบเครื่องวัดใช้มาตรฐาน NIST  ที่สามารถตรวจสอบย้อนกลับได้ มีใบรับรอง (Certificate) จาก USA

  • ย่านวัดความกระด้าง Hardness (P1) 0.00 ถึง 4.70 mg/L (ppm)
  • ความถูกต้อง ±0.11 mg/L ±5%
  • ย่านวัดค่า pH (P2) 6.5 ถึง 8.5 pH

 

สอบถามข้อมูลสั่งซื้อ ขอใบเสนอราคา

HI96736 เครื่องวัดความกระด้าง Total Hardness และ pH เป็นเครื่องวัด 2 in 1 โดยมีย่านวัดความกระด้าง Hardness (P1) ระหว่าง 0.00 ถึง 4.70 mg/L (ppm) มีความละเอียด0.01 mg/L มีความถูกต้อง ±0.11 mg/L ±5% และมีย่านการวัดค่า pH (P2) ระหว่าง 6.5 ถึง 8.5 pH มีความละเอียด 0.1 pH มีความถูกต้อง ±0.1 pH

คุณสมบัติขั้นสูงมากมายรวมถึงฟังก์ชั่น CAL Check การสอบเทียบเครื่องวัดใช้มาตรฐาน NIST ที่สามารถตรวจสอบย้อนกลับได้สำหรับการตรวจสอบและสอบเทียบเครื่องวัด ระบบล็อค Cuvette พิเศษช่วยให้แน่ใจว่า Cuvette ถูกวางในตำแหน่งเดียวกันทุกครั้ง ออกแบบมาให้พกพาสะดวกรวมความถูกต้องและความสะดวกในการใช้งาน คุณภาพสูงมีใบรับรอง (Certificate) จาก USA มีคู่มือการใช้งานภาษาไทย ขายราคาถูก จัดส่งทั่วไทย

HI96736

HI96736 (ต้องซื้อน้ำยามาตรฐานเพิ่มเติมได้แก่ น้ำยา CAL Check™ และ Reagents) 

  • Reagents and Standards (น้ำยามาตรฐาน)
  • HI96719-11 CAL Check standard cuvettes (hardness)
  • HI96710-11 CAL Check standard cuvettes (pH)

ชุดน้ำยา Reagents

  • HI93719-01 reagents for 100 tests (hardness)
  • HI93719-03 reagents for 300 tests (hardness)
  • HI93710-01 reagents for 100 tests (pH)
  • HI93710-03 reagents for 300 tests (pH)

Specifications HI96736

1) pH Specifications

  • pH Range 6.5 to 8.5 pH
  • pH Resolution 0.1 pH
  • pH Accuracy @25°C (77°F) ±0.1 pH

2) Total Hardness Specifications

  • Hardness Range 0.00 to 4.70 mg/L (ppm) as CaCO3
  • Hardness Resolution 0.01 mg/L
  • Hardness Accuracy ±0.11 mg/L ±5% of reading

Additional Specifications

  • Light Source tungsten lamp
  • Light Detector silicon photocell with narrow band interference filter @ 525 nm
  • Power Supply 9V battery
  • Auto-off after ten minutes of non-use in measurement mode; after one hour of non-use in calibration mode; with last reading reminder
  • Environment 0 to 50°C (32 to 122°F); RH max 95% non-condensing
  • Dimensions 192 x 104 x 69 mm (7.6 x 4.1 x 2.7”)
  • Weight 320g (11.3 oz.)
  • Method Total Hardness: adaptation of the Standard Methods for the Examination of Water and Wastewater, 18th Edition, colorimetricmethod; pH: phenol red method

PDF Catalog

สอบถามข้อมูล สั่งซื้อ ขอใบเสนอราคา